Subject: Newbe transformer questions for Philippe-Pierre DEJEAN.
From: rotaryeng
Date: 11/10/2013, 3:42 AM
To: AAA-rotaryeng

Philippe-Pierre DEJEAN,
Thank you again for coming up with the wall powered HV supply idea of two 110V  transformers.
It is working great and is highly reliable.

I have this book called Power Supply Cookbook by Marty Brown published by EDN.

Marty says  saturation causes instant failure of a MOSFET but he does not say why.
I assume the DC resistance of the coil is typically low enough that the voltage applied
will cause a current to ultimately flow that will burn out the MOSFET.  Is this the case?

I have certainly burned out my share. :) I assumed they failed due to a voltage spike.
Probably not true. It just failed due to the limited current rating of the MOSFET.

An analogy would be an RX8 or GM LS1 coil failing due to a longer than 4 ms dwell time
or an RPM so high that the coil overheats and melts the wire insulation. I think :)

A car battery will supply an unlimited amount of current for all practical purposes.


Paul Lamar

The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net.
You Tube http://tinyurl.com/beqqxas.
Copyright 1998-2013 All world wide rights reserved.