Subject: Newbe transformer questions for Philippe-Pierre DEJEAN.
From: rotaryeng
Date: 11/10/2013, 11:59 AM
To: AAA-rotaryeng


Philippe-Pierre DEJEAN,
Thank you again for coming up with the wall powered HV supply idea of
two 110V  transformers.
It is working great and is highly reliable.

I have this book called Power Supply Cookbook by Marty Brown published
by EDN.

Marty says  saturation causes instant failure of a MOSFET but he does
not say why.
I assume the DC resistance of the coil is typically low enough that the
voltage applied
will cause a current to ultimately flow that will burn out the MOSFET.
Is this the case?

I have certainly burned out my share. :) I assumed they failed due to a
voltage spike.
Probably not true. It just failed due to the limited current rating of
the MOSFET.

An analogy would be an RX8 or GM LS1 coil failing due to a longer than 4
ms dwell time
or an RPM so high that the coil overheats and melts the wire insulation.
I think :)

A car battery will supply an unlimited amount of current for all
practical purposes.


Paul Lamar



Paul

Yes to the core saturation scenario. Once that happens current is limited only by the DC resistance of the winding and Rd on of the FET. The circuit  you posted recently is surely a recipe for toasted silicon because:
A. the transformer is driven by 3X its rated V so it will saturate.

B. the oscillator can have other than a 50% duty cycle so the core will not stay flux balanced and will saturate.

Modern push/pull ckts are current mode controlled ensuring cycle by cycle flux balance.
BTW if your reworked Lin Tech flyback PCB is still not working, I am willing to take a crack at it.

Robert


I noticed the posted circuit worked up to about 3 volts then the current limited power supply
ocut of at about 1 amp. I know if I had connected a battery it would blow instantly.

I got curious and connected that transformer to 110 and measure the six volt side center taped.
2 volts and 3 volts on the scope :) It also kept working sort of up to 3,000 CPS.

I have an 18 volt version that I will try next.

Your offer is better than the offer I got from Lin Tech. I am having it fixed as we speak and
if it still does not work I will loan it to you.

Bottom line I am about to give up on push pull.

Paul Lamar

The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net.
You Tube http://tinyurl.com/beqqxas.
Copyright 1998-2013 All world wide rights reserved.