Would the Tango Mount work on a MII trigear installation? I have the
Lycoming mount drilled and fitted to the wall but I'm not using it.

Thanks Jeff

Our universal mount will fir most anything. Send me a sketch of the
mount you have now and I will work out the length of the members.


Paul Lamar

Paul,

Please see sketch of the Dynafocal mount that has been fitted to the
MII. I would like a universal mount with a Van or Tango nose gear
attach fitting. Hopes this helps.

Thanks Jeff

I think there is something wrong with the mount.jpg sketch. The
mounting loop appears to be rotated incorrectly with the hard points.
Anyway sell it and just use the hard points on the firewall.

I'll send some dwgs shortly.

Contact Jeff Doddridge as I think he may be out of adapter plates. I
will start on gear boxes as soon as I get the TC tested. jeff
doddridge <4starr@cox.net


Paul Lamar

-------------------------------------------------


A more up to date view.

Paul Lamar

--------------------------------------------------------

This is what it will look like with the new coax muffler. This is a
poor man's ram jet. Dynamic pressure builds due to the slip stream
and prop wash between the pipe and is heated and expelled out the
back to provide a bit of thrust.

Paul Lamar



If anyone is interested I have mount for RV7A. Mazda and nose gear
will sell cheap  I know shipping is a pain.  All is in north Tx.
Keith.

Got any pictures of the mount Keith?

Paul Lamar


The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2013 All world wide rights reserved.