Would the Tango Mount work on a MII trigear installation? I have the
Lycoming mount drilled and fitted to the wall but I'm not using it.

Thanks
Jeff

Our universal mount will fir most anything. Send me a sketch of the
mount you have now
and I will work out the length of the members.


Paul Lamar

Paul,

Please see sketch of the Dynafocal mount that has been fitted to the MII.
I would like a universal mount with a Van or Tango nose gear attach
fitting.
Hopes this helps.

Thanks
Jeff

I think there is something wrong with the mount.jpg sketch. The mounting
loop
appears to be  rotated incorrectly with the hard points. Anyway sell it
and just use the
hard points on the firewall.

I'll send some dwgs shortly.

Contact Jeff Doddridge as I think he may be out of adapter plates.
I will start on gear boxes as soon as I get the TC tested.
jeff doddridge <4starr@cox.net>


Paul Lamar

-------------------------------------------------


A more up to date view.

Paul Lamar

--------------------------------------------------------

This is what it will look like with the new coax muffler.
This is a poor man's ram jet. Dynamic pressure builds
due to the slip stream and prop wash between the pipe and is
heated and expelled out the back to provide a bit of thrust.

Paul Lamar

The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2013 All world wide rights reserved.