Subject: Latest 12 volt in 300 volt out HV supply results.
From: rotaryeng
Date: 11/18/2013, 12:39 PM
To: AAA-rotaryeng



On Monday, November 18, 2013 1:49 AM, rotaryeng <rotaryeng@earthlink.net> wrote:
You were right again Robert. An old SMP60N05 MOSFET I had lying around
 worked better than the IGBT. 300 volts out with a 6K load (50 ma) and only
10 volts in. The specs on the SMP60N05 are 50 volts at 60 amps.

I think the CMOS CD5050 gate driver is marginal at this time.

I have some ACPL-T350 opto isolated gate drivers ordered.

Paul Lamar

That looks like a better choice of driver than the cmos part.
Mosfets require a hi pk current drive. And the opto feature is a
good idea where noise generating sparks are involved.

Robert