Subject: Email News Letter Tandem airplane
From: rotaryeng
Date: 12/18/2013, 1:01 PM
To: AAA-rotaryeng


Paul,

Thank you for your time this afternoon. I learned a lot and more
importantly, I learned there is a lot more that I don't know. Please
put me on your email distribution list for the news letter.
Apparently I was on your distribution in the year 2010.

Gary


Here is that book I mentioned at the hangar.

Scientific Design of Exhaust and Intake Systems. Philip H. Smith and
John C. Morrison Published by Robert Bentley. ISBN 0-8376-0309-9*

http://www.rb.com


Gary had an idea of connecting the bottom mounted radiator air
outlet to the coaxial muffler. This will work if the outer pipe is
large enough.

Try the coax muffler. Less drag for an external muffler and a lower
note tone. The main problem with rotary noise is the high frequency
component.

It works a little bit like a ram jet, ejector or thrust augmenter so
it does not add too much to the aerodynamic drag. The tone of the
rotary sound is much more pleasant.

Also it can be visually inspected so it won't plug up if it ever
cracks.


Paul Lamar

------------------------------------- Gary, The tricky part is to get
the exhaust past the motor mount and still keep the MM in the cowl.
This is were Rhino 3D is invaluable.

Looks like you will need a few bumps on the cowl. This is a 13 B I
will redo it for a RX8 side exhaust. Exhaust Bends are limited to
about a 3 inch radius.

Paul Lamar


Are you sure that http://www.rb.com is the right address?
It has nothing to do with the book you described.

Gary Schwarz.

They might be out of biz.

Scientific Design of Exhaust and Intake Systems. Philip H. Smith

Goggleing it gave lots of sources.


Paul Lamar

The Rotary Engine News Letter. Powered by Linux. ACRE NL web site.
http://www.rotaryeng.net. You Tube http://tinyurl.com/beqqxas.
Copyright 1998-2013 All world wide rights reserved.