Hi there Paul

I'm chasing some of these engine mounts they are bc 22002 Barry mounts I think,
I,m not sure where to find them in Australia,
Also I'm looking at making another manifold for my rx8 renises motor in my rv,

I see you have bell mouths and injector bosses do they suit the standard injectors
that came with the motor, also it is a six port motor so any help with ideas on the
manufacturing would be great thanks I also have a 70 mm throttle body that is
currently on the old manifold which I guess should suffice.

Cheers
Christian
Rv7 Australia,

Try McMaster Carr they might ship to Oz.

http://www.mcmaster.com/#

We have EFI stuff for 2 inch OD P-ports. If your engine is still assembled and running and you
do not want to take it apart to convert to a P-port  Jeff is working on a six port side port manifold
for the RX8 engine.  The stock intake system is way too high.

I would put a carb on it :)

Paul Lamar

The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net.
You Tube http://tinyurl.com/beqqxas.
Copyright 1998-2013 All world wide rights reserved.