Hi there Paul

I'm chasing some of these engine mounts they are bc 22002 Barry
mounts I think, I,m not sure where to find them in Australia, Also
I'm looking at making another manifold for my rx8 renises motor in my
rv,

I see you have bell mouths and injector bosses do they suit the
standard injectors that came with the motor, also it is a six port
motor so any help with ideas on the manufacturing would be great
thanks I also have a 70 mm throttle body that is currently on the old
manifold which I guess should suffice.

Cheers Christian Rv7 Australia,

Try McMaster Carr they might ship to Oz.

http://www.mcmaster.com/#

We have EFI stuff for 2 inch OD P-ports. If your engine is still
assembled and running and you do not want to take it apart to convert
to a P-port  Jeff is working on a six port side port manifold for the
RX8 engine.  The stock intake system is way too high.

I would put a carb on it :)

Paul Lamar


Paul, A carb is fine for performance. But remind everybody to run
carb heat. Several experimental s have crashed due to carb icing. Even
certified engines running carbs often ice carburetors. FI does have
an advantage there.

Bill Jepson

The FAA won't sign it off with out carb heat. I don't know about Oz
or NZ.

Paul Lamar




G'Day Christian, if you can't get your Barry mounts posted out my, daughter has a contact in Colorado, I think she calls herself "US to Oz" she charges a small fee but is very reasonable. If you are interested I will find out more.

John Evans

http://www.ustooz.com/

The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2013 All world wide rights reserved.