I've noticed a bit of talk about the motec and microtech ECU systems for your aircraft, and just wanted to suggest one ECU system that is made here in Australia. The software is available on their site to download and view and modify offline so you can get an idea of the capabilities, as well as some decent user manuals. It is the Haltech brand of ECU's that have been specifically design for various engines including rotary engines.

Whilst they cover many models, they also have one dedicated ECU for rotary engines with specs as follows...

Platinum Sprint RE
Optimized specifically for 2 Rotor Engines - 2nd Generation RX7 (FC3S)/Turbo II, 3rd Generation RX7 (FD3S) and RX8 (SE3P)
• Built in MAP Sensor rated to 150kPa ( Up to 1.5 Bar or 22psi boost)
• Tuning via Injection Time - 16 x 16 mapping
• Supports staged injection
• Supports factory Mazda Inductive Magnetic Reluctor Trigger types
• Custom Sensor Calibrations allows for most factory sensors to be used
• USB and CAN communication ports
• Tacho, Thermo Fan and Fuel Pump Output
• 2 x User Programmable Outputs

Their website is: www.haltech.com <http://www.haltech.com>

Kind regards,
Anthony Moldenhaur


The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net.
You Tube http://tinyurl.com/beqqxas.
Copyright 1998-2013 All world wide rights reserved.