I've noticed a bit of talk about the motec and microtech ECU systems
   for your aircraft, and just wanted to suggest one ECU system that is
   made here in Australia. The software is available on their site to
   download and view and modify offline so you can get an idea of the
   capabilities, as well as some decent user manuals. It is the Haltech
   brand of ECU's that have been specifically design for various engines
   including rotary engines.

   Whilst they cover many models, they also have one dedicated ECU for
   rotary engines with specs as follows...

   Platinum Sprint RE Optimized specifically for 2 Rotor Engines - 2nd
   Generation RX7 (FC3S)/Turbo II, 3rd Generation RX7 (FD3S) and RX8
   (SE3P) • Built in MAP Sensor rated to 150kPa ( Up to 1.5 Bar or 22psi
   boost) • Tuning via Injection Time - 16 x 16 mapping • Supports
   staged injection • Supports factory Mazda Inductive Magnetic Reluctor
   Trigger types • Custom Sensor Calibrations allows for most factory
   sensors to be used • USB and CAN communication ports • Tacho, Thermo
   Fan and Fuel Pump Output • 2 x User Programmable Outputs

   Their website is: www.haltech.com <http://www.haltech.com> <http://www.haltech.com

   Kind regards, Anthony Moldenhaur

        Hi!: in Madrid, there's a good Internal Medicine specialist focusing
      his work in problems of adults with Down's syndrome, his name
      is Fernando Moldenhauer. Is he your relative'
       Best regards. Salut †
                         Jose Gros-Aymerich
                          Madrid, Spain

   Hi Jose,

   Maybe Fernando is related somewhere down the line, but not directly related to my family.

   Kind regards,

   Anthony Moldenhauer



   The Rotary Engine News Letter. Powered by Linux.
   ACRE NL web site. http://www.rotaryeng.net.
   You Tube http://tinyurl.com/beqqxas.
   Copyright 1998-2013 All world wide rights reserved.