All you guys in Oz & Nz got to get a Jan 14 back issue as there is an
article on how to build an EFI with a low cost Arduino micro
computer. This will be a good education in EFI's. I ordered a copy
for me shipped to the US for $15 Oz

Silicon Chip mag is a great Oz publication for buying and learning
electronics. http://siliconchip.com.au/


What works on one cylinder works on one rotor. It's cheap enough to
dup it for the second rotor.

Don't mess around. They will be sold out of Jan back issues shortly.

Paul Lamar



I strongly recommend Arduino kit. I made some by Ebay's chinese circuit. mostly charging battery and drill and soldering. but as going study harder. most circuit already on Ebay or any hardware store. only left thing is controller.

Arduino is very very cheap and most of all it's programming language and IDE is most valuable. just plug in via USB and install IDE( programming software) you can programming micro computer . and there is already so many example at IDE,
( IDE is just same as word processor, it's programmer's word processor )
there is so many tutorial about this.. I just pick this. but you can search all about it.

http://www.youtube.com/watch?v=E6KwXYmMiak

making 3D printer or CNC also very easy. there is already part and firmware there. and we can use this as almost everything. we can use it monitoring voltage at sensor so on.

http://www.youtube.com/watch?v=85LvW1QDLLw

http://www.youtube.com/watch?v=gDFeXYWxQ_Y


IT's key is easy to programming. that's the key and there is already many tutorials and datas. I recommend it as software engineer expert.


P_Bear.

The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net.
You Tube http://tinyurl.com/beqqxas.
Copyright 1998-2013 All world wide rights reserved.