http://www.youtube.com/watch?v=zMzt34_zOyE
Enjoy!
-Dan G.
Some times I think the customers understand and appreciate the
rotary better than Mazda Corp. :)
Paul Lamar
I couldn't agree more! Mad Mike is one of the world's great
Mazda/Rotary Champions, saw an interview awhile back in which he
stated he'd owned 27+ rotary powered vehicles over the years! He
keeps another 4 rotor Rx-7 in Japan, called the JAPBUL. (the one in
the linked video is the MADBUL) He also has a Turbo 3 rotor (812hp
20B) Rx-8 "BADBUL" (which I've seen IRL). I don't understand why
Mazda doesn't flaunt his and other success like his by others, major
fumble on their part.
http://www.madmike.co.nz/
-Dan G.
Rotaries most great benefit is easily stackable. I think if we use
better material for shaft.10 or more rotor can be stacked and still
its very small and by just common sense if we use ceramic or inconel
it can be air cooling engine. Efficiency easily go over current
gasoline engine
I think about crowed funding at kick starter or indiegogo for making
this. I have no intend about get money from it just fun job. So
people may interest in.
As we know 12 rotor rotaries size is 1.5m and it will produce over
2000hp easily. Apache choppers engine just produce 1700 hp but
extremely expensive. If we success I think we can supply this engine
on many aircraft and marine solution
What do you think about it paul and fellows?
P bear
IMHO 5 rotors in line is the limit.
Paul Lamar
Hi Paul
Can you ask you why 5 rotor is limit? I wonder, you just considering
current shaft material only.. There are so many great shaft
material.. If you teach me I really appreciate.
P_Bear.
All the torque goes through the e-shaft of the last rotor over
stressing it. Due to the required Wankel geometry that cannot be made
larger. All e-shaft sections are the same diameter.
Paul Lamar
Mr Paul
So.. It's matter of shaft material? isn't it? In that case there is
much more great material. I recently know about Maraging steel.
It's 6 times stronger than mild steel and and 2.4 time stronger than
chrommoly. I think this material until recently controlled by US
government. but now it's online. I can buy it at online. like
inconel.
http://en.wikipedia.org/wiki/Maraging_steel
http://www.dynamicmetals.net/maraging.html
I think we can still use common material if we do little redesign
shaft material and geometry. but If we use material like Maraging
steel. I think we can use same rotor as Mazda. so all problem will be
easier.
http://www.onlinemetals.com/merchant.cfm?pid=12588&step=4&showunits=inches&id=912&top_cat=0
this is link for suitable round bar. very expensive but okay for
prototype. maybe too short diameter.
I worry I bothering others, but I hope It's not, and I'm not
mechanical engineer at all but if this material is same as paper I
think we can also shaft's problem. and if there is any other ideas
please share with me.
P_Bear
Not material properties alone. People are already using the strongest
material available. It is a problem of geometry.
Paul Lamar
When it comes to engine limits, I have mentioned this 6-Rotor from PPRE
previously...
I guess limits are only the ones we choose to impose on ourselves...
Enjoy!
http://www.worldtimeattack.com/index.php/mad-mike-to-drive-6-rotor-ppre-rx4-in-turbosmart-flying-500/
Anthony Moldenhauer
Lets build a 10 rotor engine and upload it to you tube.
It won't generate over 100 HP for more than 5 minutes
but the teenagers watching you tube don't know that and will be impressed :)
Paul Lamar
The Rotary Engine News Letter. Powered by Linux. ACRE NL web site.
http://www.rotaryeng.net You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2013 All world wide rights reserved.