The thing about this so-called "race" is the design engineer is
factored
out of the equation. Individual cars have the HP and car weight
adjusted
to make the performance equal. Unlike Formula 1 where good engineering
design counts.
Not really a car race at all. They should just let all the drivers run
around the track using just their legs for 24 hours and see who wins :)
Mazda has entered their silly carcinogenic diesel in this race and
within an hour one is having problems.
Another silly car entered is the so called delta wing with a billet
block Mazda Miata engine. The "engineer" that designed this car does
not understand weight transfer in a corner. In the first hour it spun
out once.
Paul Lamar
I thought the Delta Wing had an affiliation with Nissan. Trikes do not
have exceptional stability.
Dale Davies
Last year.
Nissan/Renault wised up :) This year it is a Mazda Miata based engine
but the block is NC machined from a billet.
Paul Lamar
-------------------------------------------------------
As of right now the Delta is 16 laps down and last in class.
There is a difference between handling and cornering speed.
Paul Lamar
------------------------------------------
They interviewed John Doonan on TV and he mentioned torque and steel
pistons. Steel pistons in a diesel is a drastic way to deal with piston
over heating. That tends to limit RPM and HP because of increased
piston
weight and inertia forces on the connecting rods.
I wonder if they tried oil squirter's on the bottom of the heads of the
aluminum pistons? Standard in most aircraft piston engines and
probably
truck diesel piston engines.
They could also go with beryllium aluminum pistons, BeAl is .7
times the
density of aluminum pistons and good to 750 F while aluminum pistons
start failing at 500 F. Outlawed in F1 but the Rolex organizers might
not know that.
Cars accelerate and airplanes fly on HP with a good gear box and
not torque.
They could always try talking the Rolex organizers into allowing
them to
double the displacement of the diesel engine.
Mazda won the last Rolex race in 2012 with a RX8 rotary engine.
Now they are 12 laps down and running near the back.
How the mighty have fallen.
Paul Lamar
Paul,
Diesel engines are limited in their rpm by the delay time between the
injection of fuel and the start of combustion. That's why car diesels
have peak power around 4000 rpm and redlines around 5000. Even Mazda's
racing diesel only revs slightly higher. Therefore any additional
weight
imposed by steel pistons has no effect on the engine's revving
capability.
Csaba Csere
Do all diesel passenger cars use steel pistons? I don't pay too much
attention to them.
Are new diesel cars required to use urea anti pollution fluid in
California like the trucks?
("The BlueTec system injects water-based urea solution into the exhaust
system. The ammonia produced by the hydrolysis of the urea reacts with
the nitrogen oxide emissions and is converted into nitrogen and water
within the catalytic converter.")
The BSFC of the rotary gets much better when they are leaned to
18:1 but
the NO goes
way up.
I just found out that the Mazda diesel's are using cast iron blocks.
For some reason I got
the idea that they were aluminum. Mazda are not very fourth coming with
the tech.
Last Daytona race info I have is they were 54th in a field of 67 OA.
Even the delta is ahead
of them :)
Now that Form 1 is using turbo compound I hope Mazda wakes up and
uses it
with the rotary. IMHO a potential 30% reduction in fuel burn without
the pollution problems of the diesel and also without the exhaust valve
problems
of the piston turbo compound.
Paul Lamar
I've been watching the Daytona race. Sort of sentimental; the 24-hour
was the last time I drove in a race, in '94. And, this does not make me
a participant in the current diesel/Mazda/steel piston debates, but
something has gone wrong with the Mazda car or cars and at least one of
them is so slow it is dangerous and should be black-flagged off the
track. I have no idea why the organizers allow it to continue to stay on
the track, because it's a bad wreck waiting to happen.
As for the Delta, it might feel nimble to the drivers but that's not the
same thing as cornering speed or exit speed. IMHO the jury is still way
out because no one has yet made the comparison of equal weight and
horsepower with a conventional four-wheel layout compared to the Delta's
modified three-wheel configuration. Until somebody does that, who knows
what the advantage or disadvantage truly is? And I bet it has more than
half the drag of a conventional car and doesn't have anywhere near the
downforce; after all, its frontal area is not a lot less than a
four-wheeler, it's just narrower at the front. It's like the front end
of a Bonneville streamliner and the back end of a sports-racer.
And the organizer's efforts to have all the cars with essentially very
close top speeds seems to have resulted in them driving around in packs
and passing has to occur with dive-bomb moves through traffic into
crowded corners. I saw Jamie MacMurray make an absolutely thoroughly
professional move to avoid a wreck just because some bonehead in a
Ferrari waited too long to get on the brakes as a crowd was getting into
the chicane.
I hope Pruett wins. The very first time Scott Pruett ever drove in an
endurance race of any kind it was a three-hour end-of-season SCCA enduro
at Riverside, put on by the Cal Club. I believe he was still a teenager,
fresh out of go-karts. There were about 80 or so cars, anything with
fenders, from Showroom Stock C to TransAm Mustangs and, if memory
serves, a Porsche 935. The speed differentials on the back straight
might have been close to 2:1. His co-driver was yours truly. We won our
class. Taught the kid everything he knows.
The rest is history.
But they really ought to black-flag that Mazda and get it off the track.
Hugs and kisses --
Uncle Don [Fuller]
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2013 All world wide rights reserved.