The thing about this so-called "race" is the design engineer is
factored out of the equation. Individual cars have the HP and car
weight
adjusted to make the performance equal. Unlike Formula 1 where good
engineering design counts. Not really a car race at all. They should
just let all the drivers run around the track using just their legs for
24 hours and see who wins :) Mazda has entered their silly carcinogenic
diesel in this race and within an hour one is having problems. Another
silly car entered is the so called delta wing with a billet block Mazda
Miata engine. The "engineer" that designed this car does not understand
weight transfer in a corner. In the first hour it spun out once. Paul
LamarI thought the Delta Wing had an affiliation with Nissan. Trikes do
not have exceptional stability. Dale Davies Last year. Nissan/Renault
wised up :) This year it is a Mazda Miata based engine but the block is
NC machined from a billet.
Paul Lamar
-------------------------------------------------------
As of right now the Delta is 16 laps down and last in class. There is a
difference between handling and cornering speed.
Paul Lamar
------------------------------------------
They interviewed John Doonan on TV and he mentioned torque and steel
pistons. Steel pistons in a diesel is a drastic way to deal with piston
over heating. That tends to limit RPM and HP because of increased
piston weight and inertia forces on the connecting rods. I wonder
if they tried oil squirter's on the bottom of the heads of the aluminum
pistons? Standard in most aircraft piston engines and
probably truck diesel piston engines. They could also go with
beryllium aluminum pistons, BeAl is .7
times the density of aluminum pistons and good to 750 F while
aluminum pistons start failing at 500 F. Outlawed in F1 but the Rolex
organizers might not know that. Cars accelerate and airplanes fly on HP
with a good gear box and
not torque. They could always try talking the Rolex organizers
into allowing
them to double the displacement of the diesel engine. Mazda won
the last Rolex race in 2012 with a RX8 rotary engine. Now they are 12
laps down and running near the back. How the mighty have fallen. Paul
Lamar Paul, Diesel engines are limited in their rpm by the delay time
between the injection of fuel and the start of combustion. That's why
car diesels have peak power around 4000 rpm and redlines around 5000.
Even Mazda's racing diesel only revs slightly higher. Therefore any
additional
weight imposed by steel pistons has no effect on the engine's revving
capability. Csaba Csere Do all diesel passenger cars use steel
pistons? I don't pay too much attention to them. Are new diesel cars
required to use urea anti pollution fluid in California like the
trucks? ("The BlueTec system injects water-based urea solution into the
exhaust system. The ammonia produced by the hydrolysis of the urea
reacts with the nitrogen oxide emissions and is converted into nitrogen
and water within the catalytic converter.") The BSFC of the rotary gets
much better when they are leaned to
18:1 but the NO goes way up. I just found out that the Mazda
diesel's are using cast iron blocks. For some reason I got the idea that
they were aluminum. Mazda are not very fourth coming with the tech.
Last Daytona race info I have is they were 54th in a field of 67 OA.
Even the delta is ahead of them :) Now that Form 1 is using turbo
compound I hope Mazda wakes up and
uses it with the rotary. IMHO a potential 30% reduction in fuel
burn without the pollution problems of the diesel and also without the
exhaust valve problems of the piston turbo compound.
Paul Lamar
I've been watching the Daytona race. Sort of sentimental; the 24-hour
was the last time I drove in a race, in '94. And, this does not make me
a participant in the current diesel/Mazda/steel piston debates, but
something has gone wrong with the Mazda car or cars and at least one of
them is so slow it is dangerous and should be black-flagged off the
track. I have no idea why the organizers allow it to continue to
stay on
the track, because it's a bad wreck waiting to happen.
As for the Delta, it might feel nimble to the drivers but that's
not the
same thing as cornering speed or exit speed. IMHO the jury is still way
out because no one has yet made the comparison of equal weight and
horsepower with a conventional four-wheel layout compared to the
Delta's
modified three-wheel configuration. Until somebody does that, who knows
what the advantage or disadvantage truly is? And I bet it has more than
half the drag of a conventional car and doesn't have anywhere near the
downforce; after all, its frontal area is not a lot less than a
four-wheeler, it's just narrower at the front. It's like the front end
of a Bonneville streamliner and the back end of a sports-racer.
And the organizer's efforts to have all the cars with essentially very
close top speeds seems to have resulted in them driving around in packs
and passing has to occur with dive-bomb moves through traffic into
crowded corners. I saw Jamie MacMurray make an absolutely thoroughly
professional move to avoid a wreck just because some bonehead in a
Ferrari waited too long to get on the brakes as a crowd was getting
into
the chicane.
I hope Pruett wins. The very first time Scott Pruett ever drove in an
endurance race of any kind it was a three-hour end-of-season SCCA
enduro
at Riverside, put on by the Cal Club. I believe he was still a
teenager,
fresh out of go-karts. There were about 80 or so cars, anything with
fenders, from Showroom Stock C to TransAm Mustangs and, if memory
serves, a Porsche 935. The speed differentials on the back straight
might have been close to 2:1. His co-driver was yours truly. We won our
class. Taught the kid everything he knows.
The rest is history.
But they really ought to black-flag that Mazda and get it off the
track.
Hugs and kisses --
Uncle Don [Fuller]
Every time I hear the word "Skyactive" I cringe. The cardinal rule
in business
is: DO NOT TAKE A POSITION IN POLITICS!!!!!!!!!! You piss off half your
potential customers.
After 3/4 of the race the Skyactive diesel is over 100 laps down.
It is like it
is not moving. The definition of insanity is you keep doing the same
thing over and over and you get the same bad result.
Get with it Mazda and improve the rotary. It is easy. Add a turbine to
the exhaust like Form 1.
Paul Lamar
Participation in and sponsoring racing is for advertising and product
demonstration. This looks like
they have thrown good money after bad!! Better to let manufacturers with
deeper pockets play this
game and leave the diesels on the streets; with a power recovery turbine
including variable geometry
to broaden the effective RPM range.
Dale Davies
They could have tested turbo compound for one tenth of the money they
spent on this program. Obviously the CEO is technically naive.
Not like the old days when Kenichi Yamamoto was in charge.
Paul Lamar
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2013 All world wide rights reserved.