Apparently nearly out.  All we need now is a fuel totaliser.  Neil.

It seems to support the 13B.  Does it support manual mixture leaning?


 Mark LaPierre

Mark,
            There is no manual Knob as such to richen or lean, but
automatically richens the mix by water temp, so cold start is apparently
catered for, then leans out as temps rise.  They recommend a thermostat in
this regard.  Reads water temp, MAP, RPM. incoming air temp and computes the
rest.  I think is has sequential ignition as well.  Not sure but apparently
there is an automatic leaning curve when the motor runs at a set rpm for a
set period or longer.  So at this stage, I don't know but am finding out.
Would really miss being able to add up fuel used , so talking to them to
find out.  Neil.



The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2013 All world wide rights reserved.