Paul,
Please see attached thrust line and firewall dim. as you requsted.
I also have a van nose gear attachment to be welded to the mount assy.
let me know what you need to start work on the mount. I'm still wating
feedback from Jeff concerning the plate assy.

Thanks

Jeff Williams

OK Jeff it will be a week or so before I can work on it as I
do not have my Rhino computer with me here in NZ.

Paul Lamar  In Tauranga



Paul,
Please review the info I sent to you earlier for the MII with the NLG attachment.
I would like to send you the NLG fitting to be welded  with a deposit to get strtated on the mount. The attachment is a spreadsheet of the things I need to get started on this project.  I have contacted Jeff to put me on the next run  list to make the plate. He
also mentioned that a run needs to be broadcast for the P-port housing if anyone is interested.

Thanks
Jeff Williams


Jeff check with Neal Unger on the 3:17 PSRU.

Neil Unger <neil.unger@bigpond.com>

He and Chris Hoskins are working together to build one or more PSRU's down under.

I have may hands full for the foreseeable future on the new ignition.
After it is tested in Europe and it proves to better the Wankel BSFC the future course
of action is unclear right at the moment. I am in contact with a German
company that is interested in producing it.

I do have some time to work on a motor mount as my tig welder guy will
doing the work with my guidance.

Paul Lamar

 The Rotary Engine News Letter. Powered by Linux.
 ACRE NL web site. http://www.rotaryeng.net
 You Tube http://tinyurl.com/beqqxas
 Copyright 1998-2013 All world wide rights reserved.