Subject: Fwd: Re: worm drive twin helicopter
From: rotaryeng
Date: 2/13/2014, 11:09 PM
To: AAA-rotaryeng


   One advantage is you could build a twin driving the same worm drive
   gear. Here is a 3D sketch using two AIXRO kart Wankels.

   This is by far the lightest helicopter gear box configuration.

   20:1 400 RPM rotor.

   Paul Lamar


   Why not use a rear differential ring gear and two pinions? Off-the-shelf
   parts
   are cheap. Available in all sizes.

   Best regards,

   Randolph Toom

   Hi Randolph.

   What do you think of Form 1 adopting turbo compound ? :)

   Worm drives are much much lighter for a given output  torque.

   BTW Old 60's Peugeot sedans had worm drive rear axles. I worked
   on them when I was  in college.

   The other problem with ring gears is not enough gear reduction.
   A rotary needs 18:1 at least. Most ring gear sets are less than 4:1.


   Paul Lamar


   Paul,
   Can worm drives take the kind of RPM we are talking about?
   Bill Schertz

   I don't know. I will have to research it.

   You may need an oil cooler.

http://www.roymech.co.uk/Useful_Tables/Drive/Gear_Efficiency.html

   Paul Lamar



   One other thing is if you use a worm with more than a 5:1 ratio your rotor won't auto-rotate without another clutch. Worms self-lock in any higher ratio

   Bill Jepson


The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2014 All world wide rights reserved.