Subject: worm drive twin helicopter
From: rotaryeng
Date: 2/13/2014, 1:12 PM
To: AAA-rotaryeng


One advantage is you could build a twin driving the same worm drive
gear. Here is a 3D sketch using two AIXRO kart Wankels.

This is by far the lightest helicopter gear box configuration.

20:1 400 RPM rotor.

Paul Lamar


Why not use a rear differential ring gear and two pinions? Off-the-shelf parts
are cheap. Available in all sizes.

Best regards,

Randolph Toom

Hi Randolph.

What do you think of Form 1 adopting turbo compound ? :)

Worm drives are much much lighter for a given output  torque.

BTW Old 60's Peugeot sedans had worm drive rear axles. I worked
on them when I was  in college.

The other problem with ring gears is not enough gear reduction.
A rotary needs 18:1 at least. Most ring gear sets are less than 4:1.


Paul Lamar

The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net.
You Tube http://tinyurl.com/beqqxas.
Copyright 1998-2013 All world wide rights reserved.