Subject: worm drive twin helicopter
From: rotaryeng
Date: 2/13/2014, 3:08 PM
To: AAA-rotaryeng


    One advantage is you could build a twin driving the same worm drive
    gear. Here is a 3D sketch using two AIXRO kart Wankels.

    This is by far the lightest helicopter gear box configuration.

    20:1 400 RPM rotor.

    Paul Lamar


    Why not use a rear differential ring gear and two pinions? Off-the-shelf parts
    are cheap. Available in all sizes.

    Best regards,

    Randolph Toom

    Hi Randolph.

    What do you think of Form 1 adopting turbo compound ? :)

    Worm drives are much much lighter for a given output  torque.

    BTW Old 60's Peugeot sedans had worm drive rear axles. I worked
    on them when I was  in college.

    The other problem with ring gears is not enough gear reduction.
    A rotary needs 18:1 at least. Most ring gear sets are less than 4:1.


    Paul Lamar


    Remember that most worm gearboxes have much higher losses than other gearboxes. Average losses are around 25-30%!

    Bill Jepson


http://www.roymech.co.uk/Useful_Tables/Drive/Gear_Efficiency.html

It depends :) See the jpg.

Modern synthetic oils would help.

I doubt the MPG on a Peugeot was that much different than any
other car of the period.

Also to get 20:1 with spur gears means more stages.
May be as many as 3.

90% times 90% is 81%

Paul Lamar

-- 

 The Rotary Engine News Letter. Powered by Linux.
 ACRE NL web site. http://www.rotaryeng.net
 You Tube http://tinyurl.com/beqqxas
 Copyright 1998-2014 All world wide rights reserved.