Subject: worm drive twin helicopter
From: rotaryeng
Date: 2/13/2014, 11:11 PM
To: AAA-rotaryeng




       One advantage is you could build a twin driving the same worm drive

       gear. Here is a 3D sketch using two AIXRO kart Wankels.

       This is by far the lightest helicopter gear box configuration.

       20:1 400 RPM rotor.

       Paul Lamar

   I think you would need a way of disengaging the worm gear in the event of one engine
   failing or quitting. Worm gears work good on the drive but not as driven.

   Dale Davies


       centrifugal clutch.
       standard on kart engines.


       Paul Lamar



It is not the engine not running that needs to be disengaged. It is the fact the worm gear can not turn the worm.
The answer would be to have one way clutches on the inside of the worm gear so the shaft can turn if the gear
stops. This would require two separate gear sets running independently.

Dale Davies


The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2014 All world wide rights reserved.