One advantage is you could build a twin driving the same worm drive
gear. Here is a 3D sketch using two AIXRO kart Wankels.
This is by far the lightest helicopter gear box configuration.
20:1 400 RPM rotor.
Paul Lamar
I think you would need a way of disengaging the worm gear in the
event of one engine failing or quitting. Worm gears work good on the
drive but not as driven.
Dale Davies
centrifugal clutch. standard on kart engines.
Paul Lamar
It is not the engine not running that needs to be disengaged. It is
the fact the worm gear can not turn the worm. The answer would be to
have one way clutches on the inside of the worm gear so the shaft
can turn if the gear stops. This would require two separate gear
sets running independently.
Dale Davies
You will need a lot of free wheeling units.
Because either engine when stopped will lock the entire drivetrain
otherwise.
Also the rotor can not freewheel with one or both engines stopped.
Wormdrive is a selflocking gear.
Lutz Strobel
No problem. Use a larger version of this inside the worm gear.
Paul Lamar
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net.
You Tube
http://tinyurl.com/beqqxas.
Copyright 1998-2013 All world wide rights reserved.