Paul been thinking for years about your concept of the 50 MPH Rx8, I had
a similar idea for the Wankel Engine, but using that unique output shaft
with a hole drilled through it, as you have shown. I thought to make
light weight helicopter drive for the tail rotor, using exhaust effluent
combination to drive the tail rotor shaft. The main reason I was seeking
this type of solution was to make power out landings with a helicopter
safer with a wankel rotary engine (less hardware hanging on main rotor
gears means potential for higher Main Rotor speed), since converting to
Auto Rotation is your life saving procedure.
I digest, back to my question, Paul can the exhaust from the small one
rotor be directed to the main two rotor engine and achieve some boost to
hp. Secondary, can that effluent be re-ignited in a reduced capacity to
produce more hp ? I consider this a sort of reduced efficiency turbo
compounding idea, but could it work ?
My goal is to achieve 50 MPH Rx8 design, and ultimately reduce import
oil from overseas suppliers with interests not hostile to free
manufacturing nations of the world. If as you say this can be done with
only 50 lbs of weight, then the piping to connect exhaust to the main
rotary engine would be very light weight also.
As you state a Aixro Kart Engine would be a nice proof of concept
method, to build out a test system. Exhaust Piping and secondary burn
main engine firing could be cost effective.
In reply Paul states that "you want O2 and not CO2 to get more power :)"
"Yes you can get more power for the turbine but you need to get medium
pressure air (O2) into the exhaust system which implies a hp sucking
air pump."
Sorry Paul, was typing and not reviewing words, when I thought
re-ignition, my thought was to add O2 to main rotary engine hoping to
fire the exhaust flow of the small single rotary engine as defined on
rotaryeng.net, adding O2 using remaining fuel content or even adding
some fuel to be ignited for additional hp output.
http://www.rotaryeng.net/RX8-TC-eng3.html
George Curtis
Just the fact that you can cruise on the small engine
increases the MPG because you are in a better place on
the BSFC map.
In other words the best BSFC island
moves down towards the road load curve.
That is why a Corvette is doing 80 MPH at less than 2000 RPM.
Latest idea is to bolt an AIXRO engine onto
the RX8 differential housing.
Pure mechanical hybrid.
Paul Lamar
Opps forgot the pictures.
Here they are.
P
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net.
You Tube
http://tinyurl.com/beqqxas.
Copyright 1998-2013 All world wide rights reserved.