Paul been thinking for years about your concept of the 50 MPH
Rx8, I had a similar idea for the Wankel Engine, but using that unique
output shaft with a hole drilled through it, as you have shown. I
thought to make light weight helicopter drive for the tail rotor, using
exhaust effluent combination to drive the tail rotor shaft. The main
reason I was seeking this type of solution was to make power out
landings with a helicopter safer with a wankel rotary engine (less
hardware hanging on main rotor gears means potential for higher Main
Rotor speed), since converting to Auto Rotation is your life saving
procedure.
I digest, back to my question, Paul can the exhaust from the
small one rotor be directed to the main two rotor engine and achieve
some boost to hp. Secondary, can that effluent be re-ignited in a
reduced capacity to produce more hp ? I consider this a sort of reduced
efficiency turbo compounding idea, but could it work ?
My goal is to achieve 50 MPH Rx8 design, and ultimately reduce
import oil from overseas suppliers with interests not hostile to free
manufacturing nations of the world. If as you say this can be done with
only 50 lbs of weight, then the piping to connect exhaust to the main
rotary engine would be very light weight also.
As you state a Aixro Kart Engine would be a nice proof of
concept method, to build out a test system. Exhaust Piping and
secondary burn main engine firing could be cost effective.
In reply Paul states that "you want O2 and not CO2 to get more
power :)"
"Yes you can get more power for the turbine but you need to get
medium
pressure air (O2) into the exhaust system which implies a hp
sucking air pump."
Sorry Paul, was typing and not reviewing words, when I thought
re-ignition, my thought was to add O2 to main rotary engine hoping to
fire the exhaust flow of the small single rotary engine as defined on
rotaryeng.net
<http://rotaryeng.net> <http://rotaryeng.net>, adding O2
using remaining fuel content or even adding some fuel to be ignited for
additional hp output.
http://www.rotaryeng.net/RX8-TC-eng3.html
<http://www.rotaryeng.net/RX8-TC-eng3.html>
<
http://www.rotaryeng.net/RX8-TC-eng3.html
<http://www.rotaryeng.net/RX8-TC-eng3.html>>
George Curtis
Just the fact that you can cruise on the small engine
increases the MPG because you are in a better place on
the BSFC map.
In other words the best BSFC island
moves down towards the road load curve.
That is why a Corvette is doing 80 MPH at less than 2000 RPM.
Latest idea is to bolt an AIXRO engine onto
the RX8 differential housing.
Pure mechanical hybrid.
Paul Lamar
Opps forgot the pictures.
Here they are.
P
Paul,
Another thought, could the Main two Rotary Engine in the 50 MPG Rx8
have water injection to the rotors. I read some where that how old
steam engines worked was that super heated steam has a volume 1800 times
its original volume. Would the waste heat from the small rotary engine
be enough to create additional hp to the main rotary engine, and would
that injection damage or impair resumption of normal function of the
main rotary engine ???
Sort of creating a hybrid rotary engine, think I saw a few years
ago one of the major European Manufacturer's proposing an exhaust system
to do water injection !!!
George Curtis
That is the six cycle. Two injections of gasoline and one of water.
Lots of problems but pure water is more expensive than gasoline :)
Paul Lamar
Not sure where the Six Cycle Engine is on development, found lots of
different references when I googled it, it this the one you mean ???
http://www.damninteresting.com/the-six-stroke-engine/
This is the article I saw years ago detailing BMW's Turbo-steamer
http://www.gizmag.com/go/4936/
http://www.motortrend.com/features/editorial/112_0606_technologue_hybrid_qa/
http://www.greencarcongress.com/2011/08/bmwthermal-20110830.html
George Curtis
Yep the first is it.
Paul Lamar
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net.
You Tube
http://tinyurl.com/beqqxas.
Copyright 1998-2013 All world wide rights reserved.