Subject: Mazda RX8 coil connectors
From: rotaryeng
Date: 2/19/2014, 10:07 PM
To: AAA-rotaryeng


   I checked with a Mazda dealer and they want over
   $1000 for a complete engine harness.

   They don't sell just the connectors.

   Does anybody know where I can buy just RX8 coil connectors?

   I am making one out of a nylon block and molex round socket
   connectors but this is less than ideal.

   I am going to put the scope on the coil and check the dwell
   with the engine running.

   Paul Lamar


Paul, you should look Saab turbo coil on plug coils. They used a very advanced ferrofluid filled coil. They used them turbos to retard timing on knocking real time. The ferrofluid replaces the core and doesn't cause eddy currents. Very quick response.

Bill Jepson

I don't need any stock coils. I have an academic interest
in the RX8 coils. I need to tap into the circuit so I can hook
up my O scope.

Paul Lamar
-- 

The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2014 All world wide rights reserved.