I checked with a Mazda dealer and they want over $1000 for a
complete engine harness.
They don't sell just the connectors.
Does anybody know where I can buy just RX8 coil connectors?
I am making one out of a nylon block and molex round socket
connectors but this is less than ideal.
I am going to put the scope on the coil and check the dwell with the
engine running.
Paul Lamar
Paul, you should look Saab turbo coil on plug coils. They used a
very advanced ferrofluid filled coil. They used them turbos to retard
timing on knocking real time. The ferrofluid replaces the core and
doesn't cause eddy currents. Very quick response.
Bill Jepson
I don't need any stock coils. I have an academic interest in the RX8
coils. I need to tap into the circuit so I can hook up my O scope.
Paul Lamar
I used "stock" pins (AMP) without housing to test the integrated circuit
in the RX8-coil.
Claude
What is the part number on the pins?
or send me a screen capture.
Paul Lamar