Hi Paul,
Today I inspected a turbine jet Rotorway 162F mainly because of the
Rotorhead that I wanted some measurement from
The owner informed me he had purchased a kit from KISS Aviation for
the Turbine
They provide a reduction gearbox at the back of the turbine reducing
from some 20,000 rpm
The engine produces 140 hp (I think)
The reduction box is quite tiny, as can be seen in the photographs
The owner informed me that the 90Degree drive is a differential from
some sort of race car which was one of my original idea’s to use a
9” Ford
the engineer I spoke with about my idea is the guy who designed the
D2 which didn’t fly.he said wasn’t a good idea and wanted me to use
his Planetary design
However a 9” Ford diff crown wheel and pinion which produces many
ratios, there is a place in USA, Strange Engineering Morton Grove,
Illinois
They are suppliers of transmission components and can supply a
lightweight centre ( picture sent) for the 9” Ford Diff about
$1500.00
The diff for the EXEC cost $35,000.00 I am wondering if anyone can
identify the differential. Pascal told me it came out of some sort of
race car but
Didn’t know exactly what.
Any comments once again would be appreciated, any better solutions
would be tremendously helpful such
something already manufactured.
This is website for Turbine Kit
Turbine Helicopter Project - JetExec
<
http://www.jetproject.rdswebs.com/page2.htm
/www.jetproject.rdswebs.com/page2.htm/
View shared post <
https://www.google.com.au/
I must say that the support has been excellent from *K.I.S.S.
Aviation*. When a problem or weakness is identified, Dave Domanske is
immediately finding and *...*
Regards George Crooks from Aus
That looks like a sprint car or midget race car rear end. A midget
race car is just a smaller sprint car. Sprint cars have some other
parts that would work like hollow axle shafts.
http://en.wikipedia.org/wiki/Sprint_car_racing
Please don't send doc file pictures George. Save them as jpgs. You
can export them from doc files. I had to do it.
Paul Lamar
Here's a link to a place that carries Winters quick change rears as used
by many midgets. This is a mag case unit. I don't know the range of the
ratios available.
http://www.speedwaymotors.com/Shop/Open-Wheel-Midget/25-5.html?&page=2&facet=GA_Brand:Winters
Gary Knutson