Paul I wanted to order one of your Universal Motor Mount Kit for my
Long EZ. I attached a Rhino model of my Firewall and Hard points.
Could you add the mount, Engine and cooling arrangement and send it
back so I can see how it all fits? My Engine will be a 13B P-ported
with a TO4 Turbo. I already have Jeff Doffridge’s Adapter Plate.
Thanks Mike C. http://www.mykitlog.com/BEZR-RG/

------------------------------------------------------------------------------------


Looks like there will be turbo interference with the top motor mount
 hard point and tube.

I would move the top hard point out board on the spar just below the
skin.

If you can accept zip I can send the 3DM.

I suggest your register with Garret and get an IGS for the TO4 turbo
you will use. The TO4 seems to hold up well with the rotary.

Steve Ells, what kind of turbo is Bob Rogers using?


Paul Lamar

Paul,

I trick I have to use all the time these days to send zip files via email
is to just
rename the file leaving off the .zip suffix.  The receiving party should be
instructed to rename and add the .zip suffix.  Just ignore the warning from
Windows when removing the suffix.  Many mail programs are apparently
programed to exclude .zip and .exe files.  The rename trick works with either.

Gary Knutson

Thanks Gary

Paul Lamar


The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net.
You Tube http://tinyurl.com/beqqxas.
Copyright 1998-2014 All world wide rights reserved.