Subject: March Issue of EAA Experimenter is Now Available!
From: rotaryeng
Date: 3/10/2014, 12:27 PM
To: AAA-rotaryeng


Hi Bob;

I have been traveling and busy but yes I did see the EAA article on
your (and Teri Ann's) Mustang. Thanks for all your help. I've
forwarded this email because I thought it should be up to you whether
you want to respond. I think this guy wants to know which turbo
charger you used. Easier for me to forward it to you than to act as
go between.

I finally got the engine back in my Comanche and she's flying great.
Now to sell her so I can get into the amateur built world.

Best to you two and happy flying,

Steve



http://www.eaa.org/newsletters/1403_experimenter.html

William V. Hill Jr.  --  ATP - CFI-AIM - AGI FAA Western Pacific
Region


That is one I did not know about. Maybe the EAA is waking up to the
rotary :)

Steve Ells, I am in Santa Paula if you would like to see a whole
bunch of rotary engine airplane stuff. Send me email when you would
like to have a look. This is my RV4. Vicki Cruise taxiway hangar #6.

Do you have Bob Rogers email address ?

Paul Lamar

Paul,

Thank you for your interest.   I am using the Turbonetics 60-1 turbo with
T4 Series turbine housing, divided tang, P trim, 1.15 A/R, standard
bearing housing, water cooled.
http://www.turboneticsinc.com/60series_turbochargers

Bob J. Rogers, Mustang II w/ Mazda 13B turbo rotary

Thanks for the info Bob. How many hours do you have on the turbo so far?
We have gone through a lot of them in 16 years due to high heat and continuous high
RPM.


I suggest a  Garrett turbo tach and limit the continuous RPM to 80,000.

If you want to be on the list I suggest setting up a free private email account
with google or hotmail. I don't think it a good idea to get a lot of email at your
work account :)

Paul Lamar

The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net.
You Tube http://tinyurl.com/beqqxas.
Copyright 1998-2014 All world wide rights reserved.