Paul,

I modified the CAS sensor by cutting away part of the housing to clear rhe vee belt and the augmenter tube.

I will make a cover out of composite.

I had to move the 2 tooth sensor and will index the gear.

This will enable me to use the 24 tooth wheel for a tach input to the engine monitor using your circuit.

I also wanted to have it for more options like megasquirt.

Or ignition upgrades.

I could loose the RX-8 wheel if Tracy’s EC-4 cannot work with a P Port.

I could use your ignition with your new wheel.

Joe Berki

The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net.
You Tube http://tinyurl.com/beqqxas.
Copyright 1998-2014 All world wide rights reserved.