Needless to say I got the DVD.

Here is a rendering. I am coloring some of the parts to enhance the pictures :)

I'll take my computer to Sun N Fun and work on it there.

Paul Lamar


Hi Paul, so what do you think can we pull it off?  It is going to be a very tight squeeze but I think we can.  My motor mounts are even a little wider than a stock Long EZ by about 3 inches.  Anyway, if I can pull it off it should be one fast rocket.  Thanks again for your help and have fun in the sun!

Mike C

No Problem Mike. It will fit.

Here is some old and some new ideas.

Paul Lamar



Hey Paul, did you send something?  I never received it if you did. Also, What fuel pressure does the injectors need to work?  For some reason I was thinking 90 psi but now I'm looking at fuel selector valves and most are rated around 65 psi.

Thanks

Mike C

Not so far.
50 to 60 psi is normal.

Paul Lamar

The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net.
You Tube http://tinyurl.com/beqqxas.
Copyright 1998-2014 All world wide rights reserved.