If you have an RX8 engine and you don't want to take it apart for a
p-port and you don't mind giving up 50 HP you can get this intake
flange from:

http://www.cozygirrrl.com/


Paul Lamar

     Very beautifully made part! Does somebody know about a way to
obtain the side and central plates of an RX-8,
to transform a 13B into Peripheral Port intake, Side exahust?
  Probably, housings would need being changed too, as this arrangement
in a 13B would leave the peripheral exhaust
ports without any function but acting as undesirable dead space.
   Any ideas about this welcome. Thanks. Regards. Salut †

Jose Gros-Aymerich
Madrid, Spain



Jose,
           Not sure but I think Rohan Ambrose of xtreme rotaries in Calum
Downs (Melbourne Aust)  makes the side plates but out of Aluminium. The
plates have a cast insert to take the wear.   There is another bloke in
Brisbane, but sadly I cannot recommend him which is a pity,  Neil.


The Rotary Engine News Letter. Powered by Linux. ACRE NL web site.
http://www.rotaryeng.net. You Tube http://tinyurl.com/beqqxas.
Copyright 1998-2014 All world wide rights reserved.