If you have an RX8 engine and you don't want to take it apart for a p-port and you don't mind giving up 50 HP you can get this intake flange from:

http://www.cozygirrrl.com/


Paul Lamar

      Very beautifully made part! Does somebody know about a way to obtain the side and central plates of an RX-8, to transform a 13B into Peripheral Port intake, Side exahust?
   Probably, housings would need being changed too, as this arrangement in a 13B would leave the peripheral exhaust ports without any function but acting as undesirable dead space.
    Any ideas about this welcome. Thanks. Regards. Salut †

 Jose Gros-Aymerich
Madrid, Spain



Jose,
            Not sure but I think Rohan Ambrose of xtreme rotaries in Calum Downs (Melbourne Aust)  makes the side plates but out of Aluminium. The
plates have a cast insert to take the wear.   There is another bloke in
Brisbane, but sadly I cannot recommend him which is a pity,

Neil.



Hi Neil,
   I guess you are talking about Billet in Brisbane, why can't you recommend him, from what I have seen his work looks OK but expensive. By the way how is the gearbox coming along, Mine is stalled at the moment due to other commitments.

Chris.


The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net.
You Tube http://tinyurl.com/beqqxas.
Copyright 1998-2014 All world wide rights reserved.