Subject: Patent is now pending on new rotary ignition
From: rotaryeng
Date: 4/28/2014, 4:25 PM
To: AAA-rotaryeng



    As of Friday afternoon.

    I am buying parts for 100 coil on plug units to be used for testing
    by Mazda (hopefully) and others.

    Will fire six times or more around TDC at 11,000 RPM.

    If somebody wants one or more for testing let me know.

    Paul Lamar.... Still in Virgina

    If all goes as planned be back in SOCAL Sunday night.

    Fantastic Paul, Milo



    Can I trigger them with the older crank angle sensor?

    Lewis Bjorkacro


    You can but you will only get two sparks close together on the
    front rotor. I take it this is the one you are talking about. A
    simple circuit could be built to use the lower part and count
    pulses.

    Best to take it out and save the weight. ABS wheel speed sensors
    are cheap and two are required for a two rotor. Or you can use 3rd
    gen or RX8 sensors. You can also make your own as all they are is a
    bar magnet with a coil of wire wound around it.

    This ignition system can also be triggered directly by a computer
    but it must be reprogrammed to eliminate the dwell time and enable
    multiple sparks.

    Paul Lamar   Back in SZP


    I'd like two for my single rotor.  Tell me how much $ and
    when/where.

    Lewis.


    In about 2 weeks. Introductory price is $175 each plus shipping.

    Paul Lamar

    Paul, one per plug, or one per rotor?

    Kevin Alderman

    One per plug. That is a standard in the auto industry now.

Also the rotary racers use one MSD system per plug but one would also have to buy
and old style coil one per plug for another $50 or so.

The MSD stops multi-firing at 4500 RPM. The multi-firing it does do at low
RPM is all grouped around 20 deg BTDC within a few usec.

    Paul Lamar


    The Rotary Engine News Letter. Powered by Linux. ACRE NL web site.
    http://www.rotaryeng.net. You Tube http://tinyurl.com/beqqxas.
    Copyright 1998-2014 All world wide rights reserved.