Hi I'm just wondering if your sealing blocks with O-rings are still
available and if they will work on the renesis peripheral port engine
I'm about to build? Also if they are available how much would it cost
me to get two of them and the stainless steel sleeves that match them
sent to Australia.

Regards nick mckimmie

Check with Jeff Doddridge. He makes them and sells them.

jeff doddridge <4starr@cox.net>

Yes it will work on the renesis. A P-port renesis idles better
than a 13 B p-port

Let me know how it goes.

Paul Lamar