Final design.

Paul Lamar

Here is the tig welded rubber motor mount bushing holders.

Paul Lamar

Very Nice work Paul!

Collier, Michael

My ace tig welder did it.

The tubes are done too. You need to match drill the holes so you can slide
these up and down on the side of the  motor plate to get the exact correct position.
Use 5/16th AN bolts of the correct  9/16th grip length. Very important.

Now all we need is one of Tracy's plates.

Paul Lamar


 The Rotary Engine News Letter. Powered by Linux.
  ACRE NL web site. http://www.rotaryeng.net
  You Tube http://tinyurl.com/beqqxas
  Copyright 1998-2014 All world wide rights reserved.