The motor plate (Thanks to Richard) is in the shop Mike.
I added an inch and a half on the right side.
My tig machine did not have enough amps for this
job so I farmed it out to a fabrication shop
that had a largeoven. It needed to be pre heated
to 500 F to get a good weld. I'll let you know
what it cost.

Paul Lamar

The Rotary Engine News Letter. Powered by Linux.
 ACRE NL web site. http://www.rotaryeng.net
 You Tube http://tinyurl.com/beqqxas
 Copyright 1998-2014 All world wide rights reserved.