If you firing a rotary engine six times every 10 degrees at 10,000 RPM you
need a fast crank angle sensor.
This has a rise and fall times of about 20 nano seconds. A nanosec
is one one thousandth of a micro second. Of course everybody knows
a micro second is one one millionth of a second.
Consequently a nano second is a short period of time to say the least.
Naturally I am very pleased with this device. It is molded plastic
and strong as brick. I'll be sending it off on Monday to Poul
Woelflein Germany so he can mount it on the e-shaft of an AIXRO kart
rotary for testing our new patent pending high speed CD ignition
in a week or two.
It has the promise of reducing the fuel consumption, increasing
the power, reducing hydro carbon emissions and curing an occasional
mis-fire at idle due to port overlap. It is six times more likely
to fire a bad mixture.
The pulse width shown is about one millisecond and the pulse
amplitude is zero to 12 volts. A very solid and unambiguous signal.
Paul Lamar
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2014 All world wide rights reserved.