Subject: new design aircraft base on the Velocity and Beechcraft Starship
From: rotaryeng
Date: 6/11/2014, 8:15 AM
To: AAA-rotaryeng




   Hi Paul,
     You made my day, I was just looking at my emails and saw yours, you'er
   a funny man I like that,
     I do have many questions, so I hope you don't mind giving me some answers.
     I'm a long time scratch builder with a background in machining, and
   the last 30 years electrical, let's just say that if I can take it apart
   as i did with all my toys and improve on them or come up with something
   new well it was worth my time, I can also work with cad.

     I am in the very beginning of building my first full aircraft, built
   many models in the past all the way to 1/2 scale.
   This will be a new design aircraft base on the Velocity and Beechcraft
   Starship, so I want it to be a canard, my mission is strictly long
   distance, more in the range of 1500nm or more.
   But my engine of choice has been the Mazda 20B, I am lucky enough to
   have a friend who ships them back here to California on a regular basis,
   so I was able to get 2, since I am designing a twin.
   One question I have from you, since Tracy Cook retired, I was going to
   get my redrived from him now, I am a lost to find replacement model,
   since you have a vast wealth of knowledge, maybe you could steer me in
   the right direction.
   Thanks
   Edgar Acosta
   BTW this email address is good :)
   great site, has a vast wealth good points

   So far we have got and delivered Ford Planetary gear sets  for people
     building thier own.

   Neal Ungar in Oz and Chris Hoskins in Nz.

   They are not that hard to build. I have lots of companies in
   and around Ventura that can do the machine work and tig welding. Since
   you need
   2 It would be a good idea to build your own. I can help with engineering
   if you can handle logistics and finance. Perhaps some one else out there
   can join in that needs a gear box.


   Here is a suggested design. An improvement on the Ross which
   was 10 pounds lighter that Tracy's.

   Paul Lamar




   Good Morning Paul,
    You know it might be a good idea, to build my own, and maybe get a few of us out there to build a group sorta speak so we can take advantage of the cost savings to boot. After all it's all about cutting a few dollars here and there but still get a very good product that will last thousands of hours.
    As to the machining I can do most, and I have access to the shop next door to use their CNC as well as Bridgeport, and lathe machine, and I can write the program for the CNC to do the cutting.
    As to tig welding I could go over to our parent company PLS (Pacific Lighting Standards) who by the way could even forged a bell housing ( out of Aluminum) if needed.  One of the partners there is also a pilot too so he would be more than happy to get the work done for me at small cost.
    Bottom line I am trying to get as much done here on the west coast, before moving to the Tampa Bay area, near Spring Hill Airport few miles from there. So I have my last off spring in High School so in about three years I and the wife will be going down south while the last one (son) is off to College. So what ever I can do here I will, get er done.
    Once I'm retired I can devote my time to putting all the pieces of this puzzle together
   Thanks once again for your inout
   Edgar Acosta

    The Rotary Engine News Letter. Powered by Linux.
    ACRE NL web site. http://www.rotaryeng.net
    You Tube http://tinyurl.com/beqqxas
    Copyright 1998-2014 All world wide rights reserved.