Hi Paul, You made my day, I was just looking at my emails and saw
yours, you'er a funny man I like that, I do have many questions, so
I hope you don't mind giving me some answers. I'm a long time
scratch builder with a background in machining, and the last 30
years electrical, let's just say that if I can take it apart as i
did with all my toys and improve on them or come up with something
new well it was worth my time, I can also work with cad.
I am in the very beginning of building my first full aircraft,
built many models in the past all the way to 1/2 scale. This will
be a new design aircraft base on the Velocity and Beechcraft
Starship, so I want it to be a canard, my mission is strictly long
distance, more in the range of 1500nm or more. But my engine of
choice has been the Mazda 20B, I am lucky enough to have a friend
who ships them back here to California on a regular basis, so I was
able to get 2, since I am designing a twin. One question I have
from you, since Tracy Cook retired, I was going to get my redrived
from him now, I am a lost to find replacement model, since you have
a vast wealth of knowledge, maybe you could steer me in the right
direction. Thanks Edgar Acosta BTW this email address is good :)
great site, has a vast wealth good points
So far we have got and delivered Ford Planetary gear sets for
people building thier own.
Neal Ungar in Oz and Chris Hoskins in Nz.
They are not that hard to build. I have lots of companies in and
around Ventura that can do the machine work and tig welding. Since
you need 2 It would be a good idea to build your own. I can help
with engineering if you can handle logistics and finance. Perhaps
some one else out there can join in that needs a gear box.
Here is a suggested design. An improvement on the Ross which was 10
pounds lighter that Tracy's.
Paul Lamar
Good Morning Paul, You know it might be a good idea, to build my
own, and maybe get a few of us out there to build a group sorta
speak so we can take advantage of the cost savings to boot. After
all it's all about cutting a few dollars here and there but still
get a very good product that will last thousands of hours. As to
the machining I can do most, and I have access to the shop next
door to use their CNC as well as Bridgeport, and lathe machine, and
I can write the program for the CNC to do the cutting. As to tig
welding I could go over to our parent company PLS (Pacific Lighting
Standards) who by the way could even forged a bell housing ( out
of Aluminum) if needed. One of the partners there is also a pilot
too so he would be more than happy to get the work done for me at
small cost. Bottom line I am trying to get as much done here on the
west coast, before moving to the Tampa Bay area, near Spring Hill
Airport few miles from there. So I have my last off spring in High
School so in about three years I and the wife will be going down
south while the last one (son) is off to College. So what ever I
can do here I will, get er done. Once I'm retired I can devote my
time to putting all the pieces of this puzzle together Thanks once
again for your inout
Edgar Acosta
Paul, what ever came of the new design of the psru that included a
thrust 'sensor'?
Joshua Jacobs
Nobody was interested :)
Ironically this device is now in almost every manual transmission car
in the world
including some paddle shifters.
Paul Lamar
The Rotary Engine News Letter. Powered by Linux. ACRE NL web site.
http://www.rotaryeng.net You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2014 All world wide rights reserved.