Now that we have the sound of Neal's muffler documented we can
compare it with the coax muffler sound of Brian Trubee' RV4 muffler.
As you can tell the coax tone is lower and more IMHO pleasing :).
It is also a combined muffler and thrust augmenter.
One pound of thrust at 200 mph or 300 feet per second
is 300 lb ft/second.
The
/mechanical horsepower/ of exactly 550 foot-pounds per second is
one HP.
Since thrust HP is net HP you don't have all the losses in the gear box
and prop. My guess that amounts to 80%. So one pound of thrust becomes
300/.8 or 375 lb ft/second.
Now we still don't know how much thrust the coax muffler provides
so if Neal measured the top speed with his current muffler and
then installed a coax muffler we would find out :)
BTW equivalent flat plate area (EFPA) for a Van RV6 is about 2.32
square feet.
EFPA is equal to the drag factor times the frontal area.
The RV4 is about the same as the RV6.
Drag is equal to EFPA X .0026 X MPH^2
So RV4 drag at 200 MPH is about 240 pounds.
Net HP is 72000/550 or 131 NET HP out of the prop or about 164 engine HP.
Brian is reporting good numbers with the coax but so far not back to back
with a good conventional muffler. His old muffler was partially melted
inside. A
common occurrence with rotary muffler. They must be inspected with a
bore scope
from time to time. On the other hand a visual inspection of the open
coax is all
that is needed.
Paul Lamar
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2014 All world wide rights reserved.