Subject: Neal Ungar Glass-Star p-port take off. MP4
From: rotaryeng
Date: 6/23/2014, 7:51 AM
To: AA-1-Me


You can get a feel for the initial acceleration and power.
Also note the sound of Neal's muffler.
What prop is this Neal? Dia and pitch?

Paul Lamar

Paul,
          Prop is a prince "P" tip.  70 inch dia with 90 inch pitch which
is definitely a cruise pitch.  Works very well at 5-5500 rpm in cruise.
Currently have a whirlwind ground adjustable to try when I get time.

 Neil.


Thanks Neal. Now that the engine is running well how many hours do you have
on it?

Paul Lamar.

Paul, pushing 40 at the moment.  Still trying to adapt to a rotary
 after a lifetime with pistons.

Neil.


I think you would be a bit happier with manual leaning. Unlike an AC piston engine
the rotary benefits more from leaning and it is safer for the engine. No exhaust
valves to burn.  The rotary is happy up until it quits around 20 to one.
Fuel burn can drop up to  20% giving more range on a tank of gas.

MicroTech would be unwilling to add it as it requires a potentiometer on the
instrument panel  and another analog to digital converter in the CPU.
The software would have to changed as well.

Their main business is cars and cars don't use lean running for smog reasons.
They will say "we already have altitude compensation" but altitude compensation
is not the same thing. Altitude compensation maintains the mixture at 14 to one.
What you need at cruise is 18 to one.

You can trick their computer by adding a controlled air leak in the intake manifold
down stream of the pressure taps they are using. You do this with an off the shelf
needle valve and a wide band mixture monitor. Mixture monitors don't like
high heat so the mix-mon sensor should be after the muffler.

The computer will think the engine is getting less air than it really is and will
lean the mixture accordingly.

Here is a good needle valve from McMaster.  I can send you one PP or
bring it over when I come.

Take a picture of where the manifold pressure tap is located now
so I have a feel on how to plumb the needle valve.

Paul Lamar

The Rotary Engine News Letter. Powered by Linux.
 ACRE NL web site. http://www.rotaryeng.net
 You Tube http://tinyurl.com/beqqxas
 Copyright 1998-2014 All world wide rights reserved.