Subject: EFI Ignition redundancy.
From: rotaryeng
Date: 6/27/2014, 8:47 AM
To: AA-1-Me




Paul,  The stats apparently point [out]  that most engine failures are from electronic ignition.
 Need a fail proof system.

Neil.


When I first set out to design a stand alone ignition system I was going to use one high voltage power supply and separate, simple capacitor discharged systems for each plug.  If the HV supply failed the engine would stop.

It turned out differently for reasons I can't go into now but the current device is designed as one complete ignition system per spark plug.
Much like the now universally used coil on plug automotive ignition systems.

It is ideal for a rotary aircraft engine as there are only 4 spark plugs for 250 HP. A  four cycle, four cylinder  200 HP aircraft engine has eight spark plugs so the current Lamar Instruments system becomes impractical in that mode.

If any one Lamar Instruments ignition system fails the rotary keeps running with reduced power. If one trigger fails the engine keeps running on the other rotor.

With the current EFI if the CAS or the  computer  or the igniter box fails the engine stops.

I have now cut the size and weight of the Lamar Instruments ignition.
Very important for one systems per plug.  The new size is 2 wide by 3 long and 2.75" high. The weight is also cut. The  old size was 3 by 3 by 3.

Paul Lamar
-- 

Will there be a KOP/Hardware/diagrams/instructions for the 2 rotor and 3 rotor engines? I'm interested?
Marc

Yes. Marc the 3 rotor will require 3 triggers. One for each rotor.

Paul Lamar

The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2014 All world wide rights reserved.