Subject: OMC Snowmobile RCEs less rotary engine for sale.
From: rotaryeng
Date: 7/11/2014, 4:25 AM
To: AAA-rotaryeng



         Hello again: I've bought a 1972 Johnson Snowmobile because
   of it having installed the 35 HP OMC RCE,
      the engine is stuck, I haven't  received it yet, but any info about
   somebody able to provide parts and expertise
      in putting it back to work these OMC rotaries would be of great help.

   Also  If somebody is interested in the Snowmobile
      without the engine, I can consider a deal, the Snowmobile is currently in WI 54xxx.
         Thanks for the interest. Best regards. Salut † Jose Gros-Aymerich
   Madrid, Spain


Jose: Not good news when the engine is stuck. Most of the time, the high-speed throttle valve came loose & was sucked into the engine, wedging it's butterfly valve (& small screws that held it in place) between the rotor & the rotor housing, gouging the housing walls.

It is also possible the eccentric shaft bearing wasn't getting enough lubrication from the oil/fuel mixture, and seized. Someone posted a paper from one of the OMC engineers, who were working on the outboard program in the 1970s, and how when the rotor bearing seized, it took a sledge hammer or a press to get it off.

The high-speed throttle valve has been removed successfully by OMC enthusiasts w/out any negative consequences, to prevent it from letting go into the rotor housing.

There are no known sources of NOS OMC rotary engine parts. There was a guy in Michigan (?) by the name of Dave's OMC Warehouse who had a website showing he had lots of NOS parts. The public comments regarding him are not good at all. All comments seem to be the basic ones of sending money and no product sent. After many phone calls/emails, excuses, etc., still no product and no refunds. Guys like him need to be drawn & quartered.

I purchased many of these OMC rotaries several years ago on ebay, mostly from the snowbelt areas of the US & Canada. Just about 100% of them were still in the sleds. I asked the sellers that if I won their auction, would they be willing to remove the engine & wiring harness for extra $$ & ship it to me. Then they could sell parts off the sled (or, the whole thing) for additional profit. Most were willing to do so, & about 98% delivered after getting paid. The other 2% need to be drawn & quartered, also. This was before ebay's current guarantee system. ebay's mediation system was a joke, as they had no leverage over a crook other than to ban them from using ebay.

Kevin in Portland, OR, USA.

-- 

The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2014 All world wide rights reserved.