Subject: Are any good PSRU s still available?
From: rotaryeng
Date: 7/13/2014, 2:15 AM
To: AA-1-Me


I am getting ready to start my first plans built airplane and a 13B
would be a great candidate for it as there is already one flying
being a rotary. So far, I've been able to find everything I've
wanted to know about building an aircraft specific rotary, but it
seems that all the proven PSRUs that were designed for the Mazda
rotary are no longer available.

Can units by Real World Solutions, Powersport, or Marcotte still be
purchased? Would a Rotax gear box work?

Chad Peterson

A couple of guys in NZ and Oz are building their own. If one does
not appear I will start building them as soon as this ignition
starts selling.

Occasionally one comes up for sale.

Rotax will not work. Not strong enough.

Paul Lamar

I have an unused RWS 2.85:1 I would be interested in selling
jorogi@shaw.ca

John



There are many makes of PSRUs, here is a partial list, depends on ratios
and HP needs. Some of them I know about long ago and just pulled out
with Google to confirm they are still around.

1) EPI Inc.    www.epi-eng.com     mark 9 and 15 reduction boxes. They
do a lot of Chevy engine conversions (USA)

2) Robinson Inc www. V8seabee.com, again, another Chevy engine
conversion company, most famous for converting the OEM Franklin engines
to Chevy, get a goof improvement  in performance all around, and more
fuel efficient and cheaper to boot.(Canada)

3)Firewall Forward www.Firewall.ca  They usually convert older Honda
engines, (not the Fit engines)  and use their gearbox, however, I find
their gearbox more expensive than they should be, same price as an
engine, like $8000+ for the gear box alone!!  But they also have another
model for up to 500 HP for other conversions. (Canada)

4) Air Trikes.net They have a 160, 280 gearbox that are much more
reasonably priced.You be dealing with a Russian guy (an engineer) near
Montreal, English is not his first language, that can be a problem. But
his gearboxes been in use for a while now. Mainly in Trikes and smaller
homebuilds (Canada)

Others use even simpler solutions such as Valley Engineering and Gerome
at Raven Redrives.  (Suzuki engine conversions) for the lower power
applications, they just use a cogged belt and gears, you can change
ratios just by changing the size of the belt and gears. That is what is
inside the guts of the Firewall Forward smaller PSRU. I also believe the
belt would provide a certain among of protection against torsional
stresses, but because they do not stretch much, may not be enough. Some
of the smaller engines can use wooden props, which is great for
dampening. All the above been around for quite a while.
Tony Lam

Those chevy boxes are generally over 100 pounds negating the power
to weight ratio of the rotary.

Paul Lamar


The Rotary Engine News Letter. Powered by Linux. ACRE NL web site.
http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2014 All world wide rights reserved.