I am getting ready to start my first plans built airplane and a 13B
would be a great candidate for it as there is already one flying
being a rotary. So far, I've been able to find everything I've wanted
to know about building an aircraft specific rotary, but it seems that
all the proven PSRUs that were designed for the Mazda rotary are no
longer available.
Can units by Real World Solutions, Powersport, or Marcotte still be
purchased? Would a Rotax gear box work?
Chad Peterson
A couple of guys in NZ and Oz are building their own. If one does not
appear I will start building them as soon as this ignition starts
selling.
Occasionally one comes up for sale.
Rotax will not work. Not strong enough.
Paul Lamar
I have an unused RWS 2.85:1 I would be interested in selling
jorogi@shaw.ca
John
There are many makes of PSRUs, here is a partial list, depends on
ratios and HP needs. Some of them I know about long ago and just
pulled out with Google to confirm they are still around.
1) EPI Inc.
www.epi-eng.com mark 9 and 15 reduction boxes.
They do a lot of Chevy engine conversions (USA)
2) Robinson Inc www. V8seabee.com, again, another Chevy engine
conversion company, most famous for converting the OEM Franklin
engines to Chevy, get a goof improvement in performance all around,
and more fuel efficient and cheaper to boot.(Canada)
3)Firewall Forward
www.Firewall.ca They usually convert older Honda
engines, (not the Fit engines) and use their gearbox, however, I
find their gearbox more expensive than they should be, same price as
an engine, like $8000+ for the gear box alone!! But they also have
another model for up to 500 HP for other conversions. (Canada)
4) Air Trikes.net They have a 160, 280 gearbox that are much more
reasonably priced.You be dealing with a Russian guy (an engineer)
near Montreal, English is not his first language, that can be a
problem. But his gearboxes been in use for a while now. Mainly in
Trikes and smaller homebuilds (Canada)
Others use even simpler solutions such as Valley Engineering and
Gerome at Raven Redrives. (Suzuki engine conversions) for the lower
power applications, they just use a cogged belt and gears, you can
change ratios just by changing the size of the belt and gears. That
is what is inside the guts of the Firewall Forward smaller PSRU. I
also believe the belt would provide a certain among of protection
against torsional stresses, but because they do not stretch much, may
not be enough. Some of the smaller engines can use wooden props,
which is great for dampening. All the above been around for quite a
while. Tony Lam
Those chevy boxes are generally over 100 pounds negating the power to
weight ratio of the rotary.
Paul Lamar
Anybody in Oz interested in a Ross reduction and a Tracy Crook box -
both attached to good 12a engines could contact me by private email.
The owner of the Ross unit feels he is getting a bit old to proceed, I
am only 76 but my disabilities are limiting what I can do.
Right now we are concentrating on a light weight folding battery powered
tricycle with the ability to handle spongy grass and loose gravel - I
need it☺️
John Evans
The Rotary Engine News Letter. Powered by Linux. ACRE NL web site.
http://www.rotaryeng.net You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2014 All world wide rights reserved.