Hello again: I've bought a 1972 Johnson Snowmobile because of it
having installed the 35 HP OMC RCE, the engine is stuck, I haven't
received it yet, but any info about somebody able to provide parts
and expertise in putting it back to work these OMC rotaries would be
of great help.
Also If somebody is interested in the Snowmobile without the engine,
I can consider a deal, the Snowmobile is currently in WI 54xxx.
Thanks for the interest. Best regards. Salut † Jose Gros-Aymerich
Madrid, Spain
Jose: Not good news when the engine is stuck. Most of the time, the
high-speed throttle valve came loose & was sucked into the engine,
wedging it's butterfly valve (& small screws that held it in place)
between the rotor & the rotor housing, gouging the housing walls.
It is also possible the eccentric shaft bearing wasn't getting enough
lubrication from the oil/fuel mixture, and seized. Someone posted a
paper from one of the OMC engineers, who were working on the outboard
program in the 1970s, and how when the rotor bearing seized, it took
a sledge hammer or a press to get it off.
The high-speed throttle valve has been removed successfully by OMC
enthusiasts w/out any negative consequences, to prevent it from
letting go into the rotor housing.
There are no known sources of NOS OMC rotary engine parts. There was
a guy in Michigan (?) by the name of Dave's OMC Warehouse who had a
website showing he had lots of NOS parts. The public comments
regarding him are not good at all. All comments seem to be the basic
ones of sending money and no product sent. After many phone
calls/emails, excuses, etc., still no product and no refunds. Guys
like him need to be drawn & quartered.
I purchased many of these OMC rotaries several years ago on ebay,
mostly from the snowbelt areas of the US & Canada. Just about 100% of
them were still in the sleds. I asked the sellers that if I won their
auction, would they be willing to remove the engine & wiring harness
for extra $$ & ship it to me. Then they could sell parts off the sled
(or, the whole thing) for additional profit. Most were willing to do
so, & about 98% delivered after getting paid. The other 2% need to be
drawn & quartered, also. This was before ebay's current guarantee
system. ebay's mediation system was a joke, as they had no leverage
over a crook other than to ban them from using ebay.
Kevin in Portland, OR, USA.
Thanks for the very practical and comprehensive information. The
seller in WI send me today an e-bay message announcing he broke the
trade and refunded my money, $79.99, for the 1972 Johnson Rotary
Snowmobile, I've found some Snowmobile auctions that start in fall, so,
I'll try looking there.
The freedom-motors people, who bought the rights and perhaps also
machinery from OMC, haven't give a response yet to my query about parts
from they current line of RCS fitting the OMC RCEs and available for
customers, but a very renowned member of Wankel club in Germany told me
he has three OMC engines.
I'll keep on looking at. Have a good month. Best regards. Salut
† Jose Gros-Aymerich, Madrid, Spain
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2014 All world wide rights reserved.