Subject: SEBRING RESULTS - SO WHAT HAPPENED
From: rotaryeng
Date: 7/25/2014, 3:36 PM
To: AA-1-Me



   We encountered a rare and strange phenomena.
   When you have an amount of unlimited
   current from a car batterycertain MOSFETs can
   some times fail.

   This has happened to me twice. Once when I bought
   an off the self switching supply from Linear Tech
   and then again in Florida.

   Most R&D is done with lab supplies that have
   some output limits on current so this does not
   show up.

   Surprisingly as little as ten ohms in series with
   the battery prevents thisphenomena.

   BTW one can tig weld with as little as 3 car batteries in series.
   All you need is a tig torch and a tank of argon. Saves about
   a $1000 for a real tig welder.

   We will try again Aug 9th.

   Paul Lamar


   Paul,
   Know you're busy, but if ever have time, put the plans for car battery tig welder (torch, etc) on the site.
   Thx
   Van

A contacter out of an electric golf cart can be used to vary the voltage.
The torch is off the shelf at a welding suppy.

Paul Lamar

   The Rotary Engine News Letter. Powered by Linux.
    ACRE NL web site. http://www.rotaryeng.net
    You Tube http://tinyurl.com/beqqxas
    Copyright 1998-2014 All world wide rights reserved.