Interesting new type rotar, wow, if they ever manufacture.
http://liquidpiston.com/
RODNEY BINGHAM
Hardly Wow :) The monthly new rotary engine :)
Not a real practical rotary engine. No thought on cooling or sealing
and reciprocating motion.
=========================================
"By Kenichi Yamamoto from his book "Rotary Engine" 1981
1.3 REQUIREMENTS FOR A PRACTICAL ROTARY ENGINE Although various
types of rotary engines have been developed to date, there are few
that do not qualify as internal combustion engines or do not qualify
as a practical engine even if they satisfy the qualifications of an
internal combustion engine. The requirements for a rotary engine to
be qualified as a practical internal combustion engine can be summed
up in the following five items. The practicality of various ideas on
rotary engines can be judged by evaluating them by these criteria:
(1) Every moving part, including the timing mechanism, should make a
rotating motion. A mechanism having a reciprocating inertia will
increase mechanical noise and vibration, and will work against high
speed and high revolution. [In addition mechanisms that reciprocate
generate reversing loads. Reversing loads lead to reversing
stresses. Reversing stresses lead to metal fatigue and limited life.
The Wankel rotary engine has no reversing stresses therefor the life
of the major parts such as the eccentric shaft and rotor are
unlimited unlike, crankshafts, connecting rods, pistons and poppet
valves. Paul Lamar] Accordingly, structures that require intake and
exhaust valves and mechanisms using the rotors oscillatory motion are
not desirable.
(2) Gas seals or the working chamber should be three dimension-ally
reliable. The gas seal mechanism of a rotary engine should be
constituted by connecting the individual seals three dimension-ally.
Among the many ideas we come across are those that don't show such
three dimensional thoughts.
(3) Appropriate gas exchange of intake and exhaust should take
place. Together with having a mechanism that can correctly open and
close the ports, sufficient time for intake and exhaust should be
provided especially for high speed and high revolution. Among the
ideas on rotary engines, there are some that ignore this point.
(4) Every component part should have the strength to endure high
speed and high pressure. As the component parts are exposed to high
pressure, high sliding velocity and high heat load, every part
should have sufficient allowance in size and in shape.
(5) Sufficient cooling and lubrication should be provided. In order
to qualify as an internal combustion engine, although this is
related to above (4), durability against high heat load, high
sliding velocity, etc. are required. Therefore, the structure should
be simple, and the ideas on rotor cooling, lubrication of seal
parts, and oil seal structure should be those that are given
adequate thought.
Also, it is desirable for a practical rotary engine to have a simple
and compact structure. When we evaluate the various type's of rotary
engines devised to date in view of the above mentioned requirements,
the NSU Wankel type rotary engine is the engine that best satisfies
the above mentioned requirements."
Paul Lamar
Actually, It is supposed to be so efficient, the working model could
be air cooled. Most efficient of any combustion engine. So if that is
really true... big wow. Most horsepower, most efficient, High power
output at low RPMS, No need for a reduction drive, more weight. Now I
am very impressed with the Wankle, finally after all these years almost
as efficient as a reciprocating piston type. The amount of waste heat
has always been a problem with an aircraft install. And yes I would love
to install a wankle rotary over the lycoming in my garage, if I could
get a low weight reliable gear reduction.
If this engine actually can be run with an air cool setup.
Woooooow. Rod
I am a little confused with as smooth as the rotary is why a clutch
plate is needed? I understand why for a v-8 type engine but why for the
rotary? Rod
RODNEY BINGHAM
All speculation and wishful thinking at this stage of development.
The Wankel has billions spent on it and for the last 50 years.
The Wankel waste heat can be turned into HP with turbo compound.
Every intermittent internal combustion engine has torsional pulses.
These must be delt with.
Paul Lamar
The Rotary Engine News Letter. Powered by Linux. ACRE NL web site.
http://www.rotaryeng.net You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2014 All world wide rights reserved.