Lynn is listed as a person who either did put a rotary engine in a
Fiero GT, or wanted to do it. I'm also interested in that type of
conversion as I previously owned (and really liked) a GT but thought
it was underpowered (150 ponies) and tail-heavy. The rotary would
solve those problems.
I wanted to check to see if it was OK to call before getting too excited
about it.
Jack Beale
I am interested in how your going to solve the problem of the e-shaft
coming out of the center of the block adapted to a front drive
transmission designed for a 4 cyl.
Robert Lecercq did it in his kit car powered by a 13B turbo p-port with
slide throttle.
Robert, what transmission did you use?
Paul Lamar
The trans is from a 2004 Golf GTI with 2.8L V6. 6 spd O2M model.
You will need to dry sump it for gnd clearance. And a custom
flywheel not to mention a custom adapter plate.
The output flanges fit the 911 Porsche CV joints.
Robert
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net <http://www.rotaryeng.net/>
You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2014 All world wide rights reserved.