Subject: KiCad EDA Software Suite - Kicad EDA - KiCad EDA
From: rotaryeng
Date: 8/6/2014, 2:06 PM
To: AA-1-Me


Hey All,

I just found out about a nice PC Board layout program.  Check this
out.

http://www.kicad-pcb.org/display/KICAD/KiCad+EDA+Software+Suite

Mark LaPierre


What PC Board makers accept the files?

I am using ExpressPCB right at the moment. Free windows layout
software.

Three  2.5" x 3.8" double side plated hole  boards for $51 US.

Paul Lamar


I don't know about getting the files sent to a manufacturer, but the
file formats supported are listed on this page.

http://www.kicad-pcb.org/display/KICAD/File+Formats

Mark LaPierre


.brd PCB layout file


I have never heard of this format. With out a list of board makers
that accept this file formate what am I supposed to do. Poll the
board makers and see who accepts this format?

.brd PCB layout file

I would really like a Linux PCB layout program.

Paul Lamar

The universal format everyone accepts is RS-274X photoplotter files
(Gerber extended format) and Excellon NC drill files. Anything else is
something proprietary tied to a board house or other vendor. For 10
years I used OrCAD, and then switched to Eagle from Cadsoft about 10
years ago. I have version 5.6 and it's plenty. Newer versions run on
Windows, Mac or Linux. The free "light" version makes double sided,
100x160 mm boards and only one schematic sheet. There's a learning curve
but mostly it just works. There is a huge worldwide user community that
has answered any question I ever came up with.

For prototype pcbs I use Advanced www.4pcb.com which has cheap
"barebones" service that's comparable to ExpressPCB.

David Josephson

Thank you very much David. I'll get a quote on my boards from
Advanced www.4pcb.com


Paul Lamar

The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2014 All world wide rights reserved.